Our Founder Chairman Late Dr. K.C.G. Verghese was a visionary who pioneered high quality technical education in the fields of Engineering, Aviation, Management and Applied Science.
Hear from our key leaders about their vision for the college and the future
A renowned group of educational institutions committed to the vision of promoting quality learning.
KCG Tech is a premier institution dedicated to the holistic development of its students.
KCG Tech is an autonomous engineering college affiliated to Anna University and has top accreditations
Learn more about the capable hands guiding KCG Tech
KCG offers various scholarships and financial assistance programmes to support our bright students from economically challenged backgrounds.
KCG has a reputation for sporting excellence and we aim to keep it that way! We welcome fresh talent and support them with facilities, training and financial aid.
KCG Tech is committed to advancing knowledge through scientific inquiry, applied research, and innovation, thereby contributing to the country’s socio-economic progress. Research is our topmost priority, as it enhances teaching quality and boosts faculty confidence. We are proud to state that KCG Tech faculty and students have published numerous papers in international and national journals and presented at conferences.
Over the past five years, 1,394 research articles have been published and indexed in SCOPUS, Web of Science, UGC, Thomson Reuters, and Google Scholar, with 345 SCOPUS citations. Our institute’s SCOPUS h-index is 24.
1. Dr. R Amrutha,(2023) “Plenteous stationary wave patterns for (2+1) dimensional fokas system” Sustainable Energy Technologies and Assessments, Elsevier, 1402-4896,IF:2.9
2. Felcia Merlin, B, Amrutha, R.(2022)Spectroscopic and HLCT Analysis on 4,7-Di(2-Thienyl)-2,1,3-Benzothiadiazole and Its Di-Substituted Derivatives for Development of Potent Hole Transport Material: DFT Approach,Acta Physica Polonica A, vol. 141, issue 5, pp. 445-460,1898-794X,IF-0.73
3. Amrutha, R (2022). “Different wave patterns for (2 + 1) dimensional Maccari’s equation” Nonlinear Dynamics. Vol-108. 0924-090X,IF-5.022.
4. Dr R Amrutha, “Influence of magnetic field strength of hybrid magnet on vibration isolation of quarter car model”, Journal of Vibro Engineering, IF:0.22, Vol. 21, Issue 5, 2019, p. 1405-1413. https://doi.org/10.21595/jve.2019.19900.
5. R. Pradeep, Gladwin M. Inbavalli K. Srinivasan, K. A.Venkatesan, Murali (2018), “Dynamics of Periodically Pulsed Driven Chua’s Circuit”, In: Journal of Computational and Theoretical Nanoscience, Vol.No15 (3), Pg.No.854-858, IF: 0.13, SJR:0.22, doi number:10.1166/jctn.2018.7165
6. S. NaliniJayanthi (2018), “Synthesis and Characterization of Tin Oxide Nanoparticles Using plant extract” , In: Der PharmaChemica, Vol.No.10, Issue 2, SJR: 0.19.
7. S. NaliniJayanthi (2018), “Growth and characterization of non-linear optical DL-methionine doped copper sulphate (MCS) crystal”, In: Materials Today Proceedings, Vol.No.5, Pg.No.17709-17716, IF: 0.94, SNIP: 0.837, SJR: 0.314. doi number: j.matpr.2017.11.580.
8. S. NaliniJayanthi (2018), “Structural, optical and mechanical studies on a novel nonlinear optical material: L-Arginine Potassium Penta Borate (LAKB5) crystals”, In: Materials Today Proceedings, Vol.No.5, Pg.No.17730-17736, IF: 0.94, SNIP: 0.837, SJR: 0.314. doi number: j.matpr.2018.06.096
9. Amrutha Radhakrishnan (2018), “Experimental analysis of vibration isolation using hybrid magnet and magnetorheological fluid damper”, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.No.40, Issue.367, IF:1.627, doi number:10.1007/s40430-018-1286-2.
10. Linu Sam, R. Amrutha and P. Chandran (2018), “Computational Analysis of Physico Chemical Properties of Beta Asarone”, In: Der PharmaChemica, Vol.No.10, Issue.9, Pg.No.61-71, SJR:0.19.
11. R. G. Geethu Mani (2017), “Energy transfer studies for the liquid and solid state materials of Rhodamine B and Styryl 7 Dye”, In: Optik, Vol.No.154, Pg.No. 566-575, IF: 1.191, doi number: https://doi.org/10.1016/j.ijleo.2017.10.078.
12. Gladwin Pradeep (2017), “Two-dimensional isochronous nonstandard Hamiltonian system”In: Jounal of Engineering Mathematics, Pg.No1-13, ISSN: 0022-0833, IF: 1.099, doi number: 10.1007/s10665-016-9872-8.
13. S. NaliniJayanthi (2017), “Vickers Microindentation Hardness Studies of DL-methionine Doped Copper Sulphate (MCS) single crystal”, In: Materials Today Proceedings, Vol.No.4, Issue.2, Pg.No.358-362, IF: 0.94, SNIP:0.837, SJR:0.314, doi numbe: j.matpr.2017.01.033
14. S. NaliniJayanthi (2017), “Effect of L-threonine on the optical and electrical properties of TTZS crystal, In: Materials Today Proceedings, Vol.No.5. Issue.2, Pg.No. 3378-3389, IF: 0.94, SNIP: 0.837, SJR: 0.314, doi number: 10.1016/j.matpr.2017.11.582.
15. S. NaliniJayanthi (2017), “Growth and characterization of L-histidinium perchlorate crystals (LHP)”, In: Materials Today Proceedings, Vol.No.5. Issue.2, Pg.No.3361-3368, IF: 0.94, SNIP: 0.837, SJR: 0.314. doi number:j.matpr.2017.11.580
16. Gladwin Pradeep (2016), “Order preserving contact transformations and dynamical symmetries of scalar and coupled Riccati and Abel chains”, In: Communications in Nonlinear Science and Numerical Simulation, Vol.No.36, Pg.No: 303-318, ISSN: 1007-5704, IF: 3.181, doi number: 10.1016/j.cnsns.2015.10.019
17. R. GladwinPradeep, K. Murali, M. Lakshmanan, K. Srinivasan, V. K. Chandrasekar (2016), “Different types of synchronization in coupled network based chaotic circuits“, In: Communications in Nonlinear Science and Numerical Simulation, Vol.No.39, Pg.No.:156-168, IF: 3.181, doi number: 10.1016/j.cnsns.2016.03.002
18. Bhuvaneswari Arvind (2015), “Effect of Amino acid doped TTZS Crystal and its Characterization”, In: International Journal of ChemTech Research, Vol.No.8, Pg.No.351-360, ISSN: 0974-4290, SJR: 0.14.
19. Gladwin Pradeep (2015), “Isochronous Lienard-type nonlinear oscillators of arbitrary dimensions” In: Pramana, Vol.No.85, Issue 5, Pg.No:789-805, ISSN: 0304-4289, IF: 0.520, doi number: 10.1007/s12043-015-1104-7.
20. S. NaliniJayanthi (2015),”Growth, optical, dielectric and fundamental properties of NLO active L-histidinium perchlorate single crystals”, In: International Journal of Chemtech Research, Vol.No:8, Pg. No: 240-244, SJR: 0.14.
21. S. NaliniJayanthi (2015),”Analysis of mechanical properties of L-histidinium perchlorate (LHP) crystals”, In: Materials Today Proceedings, Vol.No. 2, Issue.4-5, Pg.No.1356-1363, IF: 0.94, SNIP: 0.837, SJR: 0.314.
22. R. Amrutha, Linu Sam (2015), “Structural and thermochemical analysis of Nano boric acid”, In: Advanced Materials Research Vol.No.1086, Pg.No.128-131, ISSN: 1662-8985, SJR: 0.12.
23. R. Amrutha (2015), “Experimental Study on Quarter Car Model using the combination of MR fluid damper and Hybrid Magnet”, In: International Journal of Applied Engineering Research, Vol.No.10, Pg.No.6363-6336, ISSN 0973-9769, SJR: 0.2.
24. S. NaliniJayanthi (2014), “Structural and Optical properties of pure and transition metal ion doped SnO2 Quantum Dots”, In: International Journal of Chemtech Research,Vol.No 6, Pg.No: 4722-4728, SJR:0.14.
25. S. NaliniJayanthi (2014), “Crystallization and Characterization of NLO active glycine copper sulphate crystal”, In: Chalcogenide Letters Vol.No.11, Issue.5, Pg.No.241-247.IF:0.127, SJR: 0.28.
26. R. G. Geethu Mani (2014), “Laser Performance of Rhodamine B and Methyl Violet B base”, In: Journal of Non Linear Optics, Vol.No. 23, Issue.4, Pg.No:1450-1453, ISSN: 0218-8635, IF: 1.491, doi number: 10.1142/S0218863514500532.
1. Vinoth Kumar, V.,Gayathri, P.Sankar, R. Arunamaheswari, C., Prasath, R. (2022) “Investigation on the Role of Molecular Planarity and Conjugation Effects on Physicochemical Properties of Anthracene and Pyrene Appended meso-5,15-Bis(Thien-2-yl)-10,20-Diphenylporphyrin Triads” Polycyclic Aromatic Compoundsthis link is disabled, 1026-7743, IF: 2.4
2. R Lakshmipathy, V Andal, B Vivekanandan, Daoud Ali, Mukesh Goel (2021) “Fixed-bed column studies for the elimination of Cd2+ ions by native and protonated watermelon rind” Chemical Papers, 0366-6352, IF:2.41
3. G. Jayanthi, Sowrirajan Sumathi , Karthik Kannan ,V. Andal ,and Sivaraj Murugan(2022) “A Review on Synthesis, Properties, and Environmental Application of Fe-Based Perovskite” Advances in Materials Science and Engineering, Vol-2022, 16878442,IF:2.098
4. V Selvaraj, R ThamilMagal, V Andal, K Arunkumar, Sivaraj Murugan(2022) “Bio-based graphene sheet/copolymer composite as supporting material for nanocatalysts towards electrochemical studies and direct alkaline alcohol fuel cells” Journal of Nanomaterials, Vol-2022, 16874129,IF:3.791
5. C. G. Aswin, A. Kumareswaran, R. Lakshmanan,S. Mathavan, V. Andal ,R. Lakshmipathy , and Ivan Leandro Rodriguez Rico (2022) “Comparative Analysis of NOx Emission Reduction in Engines Using NiCo2O4 Nanoparticles without External Reductant at LowTemperatures: An Experimental Investigation” Journal of Nanomaterials, Vol-2022, 16874129,IF: 4.05
6. Suba Kannaiyan,D Easwaramoorthi, Karthik Kannan,Andal Gopal ,R. Lakshmipathy ,Khadijah Mohammedsaleh Katubi, Nayef S. Almuaikel, and Ivan Leandro Rodriguez Rico(2022) “Pisonia Alba Assisted Synthesis of Nanosilver for Wound Healing Activity” Bioinorganic Chemistry and Applications, 1687-479X,IF:3.64
7. V Arunamaheswari, (2022)”Investigation on the Role of Molecular Planarity and Conjugation Effects on Physicochemical Properties of Anthracene and Pyrene Appended meso-5,15-Bis(Thien-2-yl)-10,20-Diphenylporphyrin Triads”Polycyclic Aromatic Compound,1563-5333,IF:1.67
8. Jayanthi, G., Andal, V., (2022). “A Review on Synthesis, Properties, and Environmental Application of Fe-Based Perovskite” Advances in Materials Science & Engineering,Volume 2022,Pages-14,IF: 2.098
9. Suba Kannaiyan,Andal Gopal , R. Lakshmipathy,(2022)”Pisonia Alba Assisted Synthesis of Nanosilver for WoundHealing Activity”Bioinorganic Chemistry and Applications,Hindawi,Vol 2022, Article ID 1775198, 8 pages. IF: 4.72
10. V. Andal,K. (2022)”Bio-Based Graphene Sheet/Copolymer Composite as Supporting Material for Nanocatalysts towards Electrochemical Studies and Direct Alkaline Alcohol Fuel Cells”,Journal of Nanomaterials,Volume 2022,IF:2.986
11. Mathavan, S., Andal, V. & R, Lakshmipathy,(2022)” Comparative Analysis of NOx Emission Reduction in Engines Using NiCo2O4 Nanoparticles without External Reductant at Low Temperatures: An Experimental Investigation”. Journal of Nanomaterials.Vol 2022. Pages-1-7. IF-3.791
12. Lakshmipathy,V. Vandhana Devi,(2022)”Garlic Peel Surface Modification and Fixed-Bed Column Investigations towards Crystal Violet Dye”Adsorption Science and Technology, Hindawi,Vol-2022 ,0263-6174,IF:4.372
13. Andal V., Bhuvaneswari G., (2020), “Silver oxide nano-colloid based selective colorimetric sensor for the recognition of cystine in aqueous solution”, Materials Research Innovations, Vol.24, Issue.4, SJR:0.23,10.1080/14328917.2019.1629733.
14. Reddy P.L., Deshmukh K., Kovářík T., Reiger D., Nambiraj N.A., Lakshmipathy R., Khadheer Pasha S.K., (2020), “Enhanced dielectric properties of green synthesized Nickel Sulphide (NiS) nanoparticles integrated polyvinylalcohol nanocomposites”, Materials Research Express, Vol.7, Issue.7, IF:1.929, 10.1088/2053-1591/ab955f.
15. Feizy J., Es’haghi Z., Lakshmipathy R.,(2020), “Aflatoxins Clean-Up in Food Samples by Graphene Oxide–Polyvinyl Poly Pyrrolidone—Hollow Fiber Solid-Phase Microextraction”, Chromatographia, Vol.83, Issue.3. IF: 1.596, https://doi.org/10.1007/s10337-019-03851-5.
16. R. Lakshmipathy (2018), “Synthesis of surface-functionalized ZnS nanoparticles and its potential application as methylene blue adsorbent”, In: Desalination and Water Treatment, Vol.No.108, Pg.No.353-361, IF:0.4, SJR:0.14,doi-number: 10.5004/dwt.2018.21980
17. V. Andal (2018), “Fabrication of ZnO/ZnO @ carbon dot as photo anode and Natural dye as photosensitizer for dye sensitized solar cell application”, In: International Journal Of Engineering And Technology, Vol.No.7, Issue.2, Pg.No: 107-110, IF:0.4-, SJR:0.17, doi number: 10.14419/ijet.v7i2.23.11894.
18. V. Andal (2018),”Experimental Investigation of Heat transfer enhancement with Copper Aluminate nanofluids in automobile radiator”, In: International Journal of Pure and Applied Mathematics, Vol.No.120, Pg.No.771-779, SJR: 0.14.
19. V. Andal (2017), “Effect of reducing agents in the conversion of Cu2O nanocolloid to Cu nanocolloid” In: Engineering Science and Technology, an International journal, Vol.No.20, Issue: 1, Pg.No.1329-1339, IF: 0.857, SNIP:2.018, doi number: 10.1016/j.jestch.2016.09.003.
20. R. Lakshmipathy (2017) “ZnS nanoparticles capped with watermelon rind extract and their potential application in dye degradation”, In: Research on Chemical Intermediates, Vol.No.43 , Issue.3, Pg.No.1329–1339, IF:1.674, SJR:0.36, doi number: 10.1007/s11164-016-2700-y.
21. Suba kannaiyan, V.Andal (2017), “Biogenic synthesized silver colloid for colorimetric sensing of dichromate ion and antidiabetic studies”, In: Research on Chemical Intermediates, Vol.No.43, Issue.5, Pg.No. 2693-2706, IF: 1.674, SJR: 0.36, doi number: 10.1007/s11164-016-2789-z.
22. R. Lakshmipathy (2016), ” Methylene blue adsorption onto native watermelon rind: batch and fixed bed column studies.” In: Desalination and water treatment, Vol.No.57, Pg.No.10632-10645, IF: 0.4, doi number: 10.1080/19443994.2015.1040462.
23. R. Lakshmipathy (2016),” Metal ion free watermelon (Citrullus lanatus) rind as adsorbent for the removal of lead and copper ions from aqueous solution”, In: Desalination and water treatment, Vol.No.57, Issue.33, Pg.No:15362-15372, IF:0.4, SNIP:0.2, doi number. https://doi.org/10.1080/19443994.2015.1072064.
24. R. Lakshmipathy (2016), ”Hydrophobic D-galactose based ionic liquid for the sequestration of Pb2+ ions from aqueous solution”, In: Journal of Molecular Liquids, Vol.No.217, Issue.33, Pg.No.1172-1180, IF:4.513, SNIP:0.849, doi number: 10.1016/j.molliq.2015.11.060
25 Suba kannaiyan, V. Andal (2016),”Corrosion Inhibition using Nanomaterials-An overview”, In: International Journal of Scientific research and modern education, Pg.No:167-170.
26. R. Lakshmipathy (2015), ” Preparation and characterization of cefditoren pivoxil based liposomes for controlled in vitro and in vivo drug release”, In: International Journal of Nanomedicine, Vol.No.10, Pg.No:149-157, IF:4.370, SNIP:1.23, doi number: https://doi.org/10.2147/IJN.S79994
27. R. Lakshmipathy (2015),” One step low temperature fabrications of CdS quantum dots by watermelon rind: Green approach”, In: International Journal of Nanomedicine, Vol.No.10, Pg. No.183-188, IF: 4.370, SNIP: 1.23, doi number: 10.2147/IJN.S79988.
28. R. Lakshmipathy (2015), ”A fixed bed column study for the removal of Pb2+ ions by Watermelon rind”, In: Environmental Science: Water research Technology, Vol.No.1, Pg.No.244-250, IF: 3.649, SJR: 1.13, doi number: 10.1039/C4EW00027G.
29. K. Buvaneswari, G. Vetha, V. Andal (2015),” Green synthesis of ZnAl2O4 nanoparticles for the degradation of methyl orange dye under visible light”, In: International Journal of ChemTech Research, Vol.No.8, Pg. No. 6-9, IF: 0.34, SJR: 0.14.
30. G. Jayanthi, R. Lakshmipathy (2015), “Colour removal studies on treatment of textile dyeing effluent by Chitosan modified Watermelon rind” In: International Journal of ChemTech Research, Vol.No.8, Pg. No: 10-15, IF: 0.34, SJR: 0.14.
31. A. Kulasekaran, Andal Gopal ,R. Lakshimipathy (2015), ”Modification in pH measurements for getting accurate pH values with different pH meters irrespective of aging and drifts in the meters,”, In: International Journal of ChemTech Research, Vol. No.8 , Pg.No.16 -24 , IF: 0.34, SJR: 0.14.
32. R. Lakshmipathy, N. Jayaprakash (2015), ”Agricultural wastes as low cost adsorbents for sequestration of heavy metal ions and synthetic dyes from aqueous solution: A mini review”, In: International Journal of ChemTech Research, Vol.No.8, Pg.No.25-31,IF: 0.34, SJR: 0.14
33. Suba kannaiyan, V. Andal (2015),”Synthesis, Characterisation and Antibacterial activities of Schiff base [New fuchsi] functionalized silver nanoparticles”, In: International Journal of ChemTech Research, Vol.No.8, Issue.5, Pg.No.54-60, IF: 0.34, SJR: 0.14.
34. R. Lakshmipathy (2015), “Synthesis of fluorescent carbon dots from mango peels”, In: International Journal of ChemTech Research, Vol.No.8, Pg.No.61-64 , IF:0.34, SJR:0.14.
35. M. Tamilmagan, D. Easu, V. P. M. Baskarlal, V. Andal (2015), “Synthesis, characterization, design and study of magnetorheo logical property of nano fe2O3”, In: International Journal of ChemTech Research, Vol.No.8, Pg.No:65 -69, SJR: 0.14.
36. M. Tamilmagan , Aruna Maheswari , PriyaBijesh , Andal Gopal (2015), ” Biodiesel production from waste cooking oil using green synthesized nanoFe2O3 and CuO impregnated nanoFe3O4”, In: International Journal of ChemTech Research, Vol.No.8, Pg. No. 90-96, SJR: 0.14.
37. V. Andal (2015), ”Effect of Nature of Surfactant on the Formation of ß-Ag2Se Nanoparticles and Optical Properties of ß-Ag2Se and ZnS/ß-Ag2Se Nanocomposite”, In: Journal of nano research, Vol.No.30, SJR:0.21, Pg.No.96-105, doi number: 10.4028/www.scientific.net/JNa.
38. V. Andal (2014),”Removal of lead ions by NiFe2O4 nanoparticles”, In: International Journal of research in Engineering and Technology, Vol.No.3, Issue.1, Pg.No:475-483, SJR: 0.17.
39. V. Andal (2014),” A study on the removal efficiency of organic load and some nutrients from sewage by CERRATOPHYLLUM DEMERSUM-L,” In: Journal of Material Environmental Science, Vol.No.5, Pg.No.3-8, SJR:0.3.
40. V. Andal (2013),” Differential response of Ag2O nano colloid on interacting with halide ions”, In: Sensor letters, In: Sensor Letter, Vol.No.11, Issue.12, Pg.No:1-6, SJR:0.17, doi number: 10.1166/sl.2013.3071.
1. Panneerselvam, R. G.Prakash, C.Rashma, M.Rajpurohit, Taruna(2023) “Computer-Aided Special Stepping Jacquard Graphing for Weaving the Reversible Traditional Jamdani Fabrics Using Discontinuous Inter-turning Extra Weft” Journal of Testing and Evaluation, ASTM International, Vol-55, 1945-7553,IF:1.333
2. G. Mohamed Zakriya, S. Hemavarthini, SM Udaya krithika, S.Sakthivel (2023) “Thermal comfort properties of bilayer knitted fabric for sportswear” Asian Textile Journal,Vol-32,0971-3425,IF:0.01
3. V. Bhanu Rekha, C. Prakash & T. Rasigha(2022) “Fabricating a Sanitary Napkin Performance Tester” Journal of Natural Fibers,Vol-19,1544-046X, IF: 4.7
4. V. Bhanu Rekha, C. Prakash & K. Gowri(2022) “Synthesis and characterization of superabsorbent natural polymers fromagro-waste fibres” Indian Journal of Fibre & Textile Research, Vol-47, 0975-1025IF:0.825
5. Dr. R. G. Panneerselvam, D. Balamurugan, C. Prakash and D. Raja(2022) “A study on generating the perspective projection of different weave structures using 3D computer-aided designing tools” Journal of the Textile Institute, 17542340,IF:2.167
6. Surya Bharath, V. Bhanu Rekha & K. Gowri(2022) “EIMAD 2022: Advances in Design, Music and Arts II pp 124–137” Springer Series in Design and Innovation book series,Vol-25, 2661-8192,IF:0.1
7. Surya Bharath and Dr. G. Mohamed Zakriya(2022) “Design of personal protective wear for disabled people: An improvisation on Ergonomics” International Ergonomic conference, IIT Guwahati,2757-0525.
8. V Bhanu Rekha, K Gowri (2022),”Synthesis and characterization of Superabsorbent natural polymers from agro-waste fibresIndian Journal of Fibre & Textile Research (IJFTR)”,Vol 47,0975-1025,IF:0.839
9. Bhanu Rekha V, (2022) “Fabricating a Sanitary Napkin Performance Tester, Journal of Natural Fibers”, Volume 19, 2022 – Issue 15,1544-0478.IF-4.183.
10. R. G. Panneerselvam Study on the float-control weaves application algorithms of computer-aided jacquard graph designing for different figured fabrics, The Journal of The Textile Institute, Vol-114,Pages 88-100,1754-2340.IF:2.061
11. Dr.G.MohamedZakriya, “Exploration of Jute-HCP composites material for building environments”, Journal of Natural Fibres, ISSN: 1544-046X, SJR:0.31,
1. Kaliappan. S, (2023) ” Tanning Wastewater Sterilization in the Dark and Sunlight Using Psidium guajava Leaf-Derived Copper Oxide Nanoparticles and Their Characteristics” ACS Omega, 2470-1343,IF: 4.1.
2. Kaliappan. S, (2023) ” Fatigue behaviour of Kevlar/carbon/basalt fibre-reinforced SiC nanofiller particulate hybrid epoxy composite” e-Polymers ,1618-7229,IF:3.7
1. Syam Narayanan S., Asad Ahmed R.(2022),”Effect of chord-wise flexibility in the lift generation of flapping MAV with membrane wing”Journal of Aircraft Engineering and Aerospace Technology,Vol. 94 No. 5, pp. 792-798,0002-2667,IF:0.991
2. Chacko S., Sumathi R., Narayanan M.K.B., Syam Narayanan S., (2020), “Predominant factor prediction to accelerate growth of quick-service restaurants (QSR)”, International Journal of Scientific and Technology Research, Vol.9,Issue.4. SJR: 0.12.
3. Syam Narayanan S., Asad Ahmed R., Joseph A.C.M.,(2020), “Development of artificial butterflies for the study of endangered asiatic elephants (Elephas maximus maximus) in sri lankan forests”, International Journal of Scientific and Technology Research, Vol.9, Vol.3.SJR:0.12.
4. K. Vijayaraja (2018), “Flow field and acoustics characteristics of elliptical jet”, In: Aircraft Engineering and Aerospace Technology, Vol.No:90 Issue: 11, Pg. No: 1364-1371, SJR: 0.35, doi number: 10.1108/AEAT-04-2017-0111.
5. K. Vijayaraja (2018), “Energy decay characteristics of a non-circular supersonic jet”, In: International Journal of Ambient Energy, ISSN: 0143-0750 (Print) 2162-8246 (Online), SJR: 0.36, doi number:10.1080/01430750.2018.1437558
6. K. Vijayaraja (2017) “Acoustic and mixing characteristic of CD nozzle with inverted triangular tabs”, In: International Journal of Ambient Energy, ISSN: 0143-0750 (Print) 2162-8246 (Online), SJR: 0.36, doi number:10.1080/01430750.2017.1354328.
7. K. Vijayaraja (2017), “Flow field and acoustic characteristics of elliptical throat CD nozzle”, In: International Journal of Ambient Energy, ISSN: 0143-0750 (Print) 2162-8246 (Online), SJR: 0.36, doi number: 10.1080/01430750.2017.1360205.
8. K. Vijayaraja (2017), “Performance Optimization of Aircraft in Frontline Squadrons”, In: Aircraft Engineering and Aerospace Technology, Vol 89, Issue 2, ISSN: 1748-8842, SJR:0.8.
9. K. Vijayaraja (2017), “Mixing characteristics of elliptical throat sonic jets from orifice and nozzle”, In: International Journal of Ambient Energy, ISSN: 0143-0750 (Print) 2162-8246 (Online), SJR: 0.36, doi number:10.1080/01430750.2017.1399461.
10. K. Vijayaraja (2017), “Reduction of Aircraft Downtime using Concurrent Maintenance Philosophy and Condition Based Maintenance”, In: Journal of the Balkan Tribological Association, Vol. 23, No 1, Pg.No:127-136, ISSN: 1310-4772, SJR:0.21.
11. K. Vijayaraja (2017), “Maintenance Optimization of Aircraft in Operating Environment Using Automatic Identification Techniques”, In: Indian Journal of Science and Technology, Vol.No.10 (21), ISSN: 0974-6846, SJR: 0.16, doi number: 10.17485/ijst/2017/v10i21/111761
12. R. Asad Ahmed, Venkatraman (2016), “Study of Slanted perforated shapes in tabs for control of subsonic Jets”, In: AIAA, SJR: 0.76, doi number: doi.org/10.2514/6.2015-2423.
13. Syam Narayanan, R. Asad Ahmed (2016), “Experimental study of single and multi-winglets”, In: Advances and Applications in Fluid Mechanics, ISSN: 0973-4686. SJR:0.16.
14. Supradeepan (2015), ” Low Reynolds Number Flow Characteristics for Two Side by Side Rotating Cylinders”, In: Journal of fluids engineering, Vol.137, No.10, IF: 1.195, doi number: 10.1115/1.4030486.
15. R. Asad Ahmed (2014),“Augmentation of Lift By Airfoil Modification”, In: International Journal of Applied Engineering Research, ISSN 0973-4562 Vol.No.9(22), Pg.No. 5188-5192, SJR:0.2.
16. R. Asad Ahmed (2014), “Numerical Simulation of Supersonic Free Jets,” In: International Journal of Applied Engineering Research, ISSN 0973-4562 Vol.No.9 (22), Pg.No. 5399-5406, SJR:0.2.
17. Mr. S. Venkatramanan, Ms. J. Anbarasi, Dr. K. Vijayaraja(2019), “Investigation of Reduction in Base Drag using Experiment and CFD at Subsonic Speed Regimes”, In: National Conference on Aerospace Engineering Research-2019(NCAER-19), Chandigarh University –Chandigarh, India. (Best Paper).
18. Mr. V. Manishankar (2019), “Desirability optimization for Quality machining in advanced Manufacturing”, In: Proceedings of the second international conference onSustainable Energy Resources, Materials and Technologies, Chennai, India.
19. Mr. Aasish Chandra Mouli (2018), “Non GPS Navigation”, In: AUVSI International Conference on Indoor flight issues, Beihang university, Beijing China.
1. Palaniappan Sambandam , (2022),”Deep attention based optimized Bi-LSTM for improving geospatial data ontology”Data & Knowledge Engineering,Volume 144, March 2023, 102123, IF:1.992.
2. J. Raja Paul Perinbam, M. Krishnamurthy, (2022)”Visualization of occipital lobe and zygomatic arch of brain region through non-linear perspective projection using DCO algorithm”,Soft Computing,Springer,Vol-26,11599–11610, IF:3.732
3. N. Lakshmi, M. Krishnamurthy (2023)”Association rule mining based fuzzy manta ray foraging optimization algorithm for frequent itemset generation from social media”Concurrency and Computation: Practice and Experience,Vole34, 1544-0478,Issue10,1544-04,Impact Factor-1.5
1. S Mathavan, (2023)”Experimental Analysis for Nitrogen Oxide Reduction in a Diesel Engine by the Hydrogen-Assisted Selective Catalytic Reduction Technique”Advances in Materials Science and Engineering,Volume 2023, Article ID 8686871, IF:2.098
2. Dillibabu Venugobal,(2022)” Investigation Of Gasification Reactions And H2/Co Ratio Analysis For Rice Husk Air Gasification Simulation”International Scientific Journal – Thermal Science.Vol. 27, No. 1B, pp. 881-890,IF:1.971
3. Dillibabu Venugobal., (2022) Investigation Of Biomass Gasification Simulation Using Air, Steam And Oxygen As Gasifying Agent”International Scientific Journal – Thermal Science, Vol. 26, No. 6B, pp. 5109-5119,IF:1.971
4. Mathavan, S., Andal, V. & R, Lakshmipathy,(2022)” Comparative Analysis of NOx Emission Reduction in Engines Using NiCo2O4 Nanoparticles without External Reductant at Low Temperatures: An Experimental Investigation”. Journal of Nanomaterials. Vol 2022. Pages-1-7. IF-3.791
1. E. Pravin Raaj, K. Bhuvaneshwari, R. Lakshmipathy , V.Vandhana Devi and Ivan Leandro Rodriguez Rico(2022) “Garlic Peel Surface Modification and Fixed-Bed Column Investigations towards Crystal Violet Dye” Adsorption Science & Technology, Vol-2022, 2048-4038,IF:2.90
2. Dr. M Muthukannan,(2023) “Effect of chemical treatment on physico-chemical properties of a novel extracted cellulosic Cryptostegia grandiflora fiber” Materials Research Express,IOP Press, 2053-1591,IF:2.27
3. Lakshmipathy, V. Vandhana Devi,(2022)”Garlic Peel Surface Modification and Fixed-Bed Column Investigations towards Crystal Violet Dye”Adsorption Science and Technology, Hindawi,Vol-2022 ,0263-6174,IF:4.372
4. P. S. Aravind Raj, V. Vandhana Devi, P. S. Joanna, F. S. Frieda (2018), “Analytical Study on Improved Connection System for Steel Concrete Composite Column and Reinforced Concrete Beam”, In: International Journal of Pure and Applied Mathematics, Vol. 118, Issue No. 24, Pg.No.1-8, SJR: 0.14.
5. S. P. Sangeetha, P. S. Aravind Raj (2018), “Study on finite element analysis of reinforced concrete beams with GGBS using ANSYS”, In: International journal of Pure and applied Mathematics, Vol.No.118, Issue No. 5, Pg.No. 881-887, SJR: 0.14.
6. T. Subbulakshmi, P. Kavitha, Ann Mary Mathew, J. John Alexander (2018), “An analytical studies on high performance concrete incorporated with industrial by-products”, In: International Journal of Pure and Applied Mathematics, Vol. 118, SJR: 0.14, Issue No. 24.
7. V. Vandhana Devi, R. Nagendran (2017), “Spatial Assessment of water quality in Kondurupalem Lagoon Inlet, South East Coast of India”, In: Indian Journal of Ecology, Vol.No.44, Pg.No.687-696, SJR:0.13, ISSN: 0304-5250.
8. S. S. Judith Emiliah Christy, R. Anantharaj, B. Ambedkar, J. Dhanalakshmi (2017), “Treatment of Synthetic Turbid Water using Natural Tamarind Seeds at Atmospheric Conditions”, In: Research Journal of Pharmaceutical, Biological and Chemical Sciences, (Suppl.) RJPBCS 8(3S), Pg.No. 352- 359, IF: 0.35.
9. P. S. Aravind Raj, P. S. Joanna (2016), “Experimental study on encased CFST column and reinforced concrete beam joint with steel cage”, In: International Journal of Chemical Sciences, Vol.No.14, Issue No.01, Pg.No.1-9, IF:1.6,ISSN No:0972-768X.
10. M. Mathiazhagan, T. Selvakumar (2016), “An integrated approach for ground water potential zone in Palar basin in and around Walajabad block”, In: International Journal of Advanced Engineering Technology, Vol.No.7, Issue No.03, Pg.No.76-82, SJR: 0.14, ISSN No: 0976-3945.
11. J. John Alexander (2015),”Colour removal studies on treatment of textile dyeing effluent by chitosan modified watermelon rind composite”, In: International journal of Chem-Tech Research, Vol.8,Issue no.5,Page No.10-15, SJR:0.14, ISSN:0974-4290
12. J. John Alexander (2015), ”Modification in pH measurements for getting accurate pH values with different pH meters irrespective of aging and drifts in the meters”, In: International journal of Chem Tech Research, Vol.No.8, Issue No.5, Pg.No.16-24, SJR:0.14, ISSN No:0974-4290. .
13. T. Selvakumar (2015),”Water Quality Improvements in Soil Aquifer Treatment (SAT) Simulated Soil Columns”, In: Indian Journal of Science and Technology, Vol. No.8, Issue No.28, Pg.No.1-6, SJR: 0.16, ISSN No: 0974-6846 .
14. T. Selvakumar (2015), ”Ammonia Behavior in Wastewater Reclamation by Soil Aquifer Treatment”, In: Indian Journal of Science and Technology, Vol.No.8, Issue No.14, Pg.No.1-10, SJR:0.16, ISSN No:0974-6846.
15. T. Selvakumar (2015), ”Geoelectrical resistivity survey of the Chennai Sewage Treatment Plants for Identifying reclaimed water recharge”, In: Journal of Coastal Sciences, Vol.No.2, Issue No.1, Pg.No.19-23, SJR:0.38, ISSN No:2348-6740.
16. M. Mathiazhagan, T. Selvakumar,(2015), ”Groundwater abstraction and Contamination studies at Thiruvidanthai Village, along East Coast Road in Chennai using Electrical resistivity method with geochemical analysis”, In: Journal of Coastal Sciences, Vol.No.2, Issue No.1, Pg.No.12-18 ,SJR:0.38, ISSN No:2348-6740.
17. T. Selvakumar (2015),”Investigation of Ammonia removal from synthetic wastewater during column studies of Soil Aquifer Treatment”,In: JCHPS, Vol. No.1, Issue No.8, Page No.8-12,SJR:0.15, ISSN No:0974-2115.
18. M. Mathiazhagan, T. Selvakumar ( 2015), ”Surface Geo-Electrical Sounding for the Determination of Aquifer Characteristics in part of the Palar Sub-Basin”, In: JCHPS, Vol.No.1, Issue No.8, Pg.No.1-7, SJR:0.15., ISSN No:0974-2115,
19. V. S. Priya ( 2015), ”Treatment of Volatile Organic Compounds in Pharmaceutical Wastewater using Submerged Aerated Biological Filter”, In: Chemical Engineering Journal ,Vol.No.266, Issue No.1, Page No.309–319, IF:6.735, SNIP:1.946, SJR:1.863., ISSN No:1385-8947.
20. V. S. Priya (2015),”Membrane bioreactor for the treatment of VOC laden pharmaceutical wastewater: Effect of biological treatment systems on membrane performance”, In: Journal of Water Process Engineering, Vol.No.7, Issue No.1, Pg.No.61–73, ISSN No: 2214-7144, IF: 4.00, SNIP: 1.360, SJR: 0.925.
21. V. S. Priya (2015),”Photo catalytic degradation of aqueous VOCs: Degradation kinetics of VOC, In: International Journal of Applied Engineering Research, Vol. No.10, Issue No.95, Page No.41-45, ISSN No: 0973-4562, SJR: 0.2.
22. T. Selvakumar (2014), ”Reclaimed water recharge: A review of Water quality improvement during column studies of soil aquifer treatment (SAT)”, In: Indian Journal of Innovations and Developments, Vol No.3, Issue No.2, Page No.35-43, ISSN No:2277-5390.
23. John Alexander (2014),”A study on the removal efficiency of organic load and some nutrients from sewage by ceratophyllum demersum”, In: JHESCN, Vol.No.5, Issue No.3, Pg.No.859-864, and ISSN No: 2028-2508.
24. P. S. Aravind Raj (2014), “Experimental study on reinforced concrete beam and composite column joint with square steel cage”, In: Applied Mechanics and Materials Journal, Vol.No.622, Issue No.1, Pg.No.81-88, ISSN No: 1662-7482, SJR:0.12.
25. P. S. Aravind Raj (2014), ”Reinforced concrete beam – composite column joint with stiffening ring subjected to cyclic loading”, In: International Journal of Earth Sciences and Engineering ,Vol.No.07, Issue.05, Pg.No.862-868, ISSN.No:0974-5904, SJR:0.11.
1. Karthi, M., Jothi, S. & Chandrasekar, A.(2023) “The self-adaptive dwarf mongoose optimized bidirectional network approach for enhanced recognition of overlapped English cursive characters” Signal, Image and Video Processing,Vol-17,1863-1711, IF:2.0
2. Nivedha, E., Chandrasekar, A. & Jothi, S(2023) “An optimal hybrid AI-ResNet for accurate severity detection and classification of patients with aphasia disorder” Signal, Image and Video Processing,Vol-17,1863-1703,IF:1.583
3. Babu, R., Kannappan, J., Krishna, B.V(2023) “An efficient spam detector model for accurate categorization of spam tweets using quantum chaotic optimization-based stacked recurrent network” Nonlinear Dynamics, Vol-111, 0924090X, IF:5.741
4. Vasantha Kumar V, Sendhil Kumar S(2023) “Developing a conceptual framework for short text categorization using hybrid CNN- LSTM based Caledonian crow optimization” Expert Systems with Applications,Vol-212, 1873-6793,IF:8.665
5. M. Krishnamurthy,(2022),”Wrapper Based Linear Discriminant Analysis (LDA) for Intrusion Detection in IIoT”Computer Systems Science and Engineering, Vol.45,0267-6192, IF:4.397
6. Dhanalakshmi R,(2022)”Multi-attribute Group Decision-making Based on Hesitant Bipolar-valued Fuzzy Information and Social Network”,Computer Systems Science & Engineering, Tech Science Press.0267-6192,IF:4.397
7. Dhanalakshmi,”Abnormality Identification in Video Surveillance System using DCT”,Intelligent Automation & Soft Computing,I1079-8587,IF:1.9.
8. Priya K., Krishnaveni R., Krishnamurthy M., Bairavel S., (2020), “Analyzing social emotions in social network using graph based co-ranking algorithm”, International Journal of Technology and Human Interaction, Vol.16, Issue.2..
9. Devi T.S., Dhanalakshmi R., Sankar S., (2020), “An improved framework for sentiment analysis for college reviews”, International Journal of Advanced Trends in Computer Science and Engineering, Vol.2, Issue.2, 10.30534/ijatcse/2020/162922020..
10. Bairavel S., Krishnamurthy M., (2020), “Novel OGBEE-based feature selection and feature-level fusion with MLP neural network for social media multimodal sentiment analysis”, Soft Computing, IF:3.050, 10.1007/s00500-020-05049 6
11. I .R. Praveen Joe, P. Varalakshmi (2019), “An Analysis on Web-Service-Generated Data to Facilitate Service Retrieval, In: Journal of Applied Mathematics and Information Sciences, Vol.No.13, Issue.1, Pg.No. 47-55, IF: 1.232, SJR: 0.22, doi number: 10.18576/amis/130107.
12. I .R. Praveen Joe, P. Varalakshmi (2019), “An Analysis on Web-Service-Generated Data to Facilitate Service Retrieval, In: Journal of Applied Mathematics and Information Sciences, Vol.No.13, Issue.1, Pg.No. 47-55, IF: 1.232, SJR: 0.22, doi number: 10.18576/amis/130107.
13. Saravanan P., Sethukarasi T., (2020), “RETRACTED ARTICLE: Optimal Hop Selection Based Novel Trust Based DDoS Attack Removal Framework for Reliable and Secured Transmission of Data in VANETs”, Wireless Personal Communications, Vol.113, Issue.1, IF: 1.061, 10.1007/s11277-019-06385-z.
14. Prabakeran S., Sethukarasi T., (2020), “Optimal solution for malicious node detection and prevention using hybrid chaotic particle dragonfly swarm algorithm in VANETs”, Wireless Networks, IF:2.659, 10.1007/s11276-020-02413-0..
15. S. Prabakeran (2018), “An Automatic Helmet Detection and Penalty System Using Image Descriptors and Classifiers”, In: Journal of Computational and Theoretical Nanoscience, Vol.No.15 (6-7), Pg.No. 2245-2250(6), SJR: 0.22.
16. S. Prabakeran (2018), “Authentic Novel Trust Propagation Model with Deceptive Recommendation Penalty Scheme for DDOS Attacks”, In: Journal of Computational and Theoretical Nanoscience , Vol.No.3 Issue.1, SJR:0.22, ISSN No: 2457-0176.
17. S. Prabakeran (2018), “An Efficient Software Defined Network Based Cooperative Scheme for Mitigation of DDOS Attacks”, In: Journal of Computational and Theoretical Nanoscience, Vol.No.15 (6), Pg.No.2221-2226, SJR: 0.22.
18. P. Selvi Rajendran (2018), ”Virtual Information Kiosk Using Augmented Reality For Easy Shopping”, In: International Journal of Pure and Applied Mathematics, Vol.No.118 Issue.20, Pg.No.985-994, ISSN: 1311-8080, SJR:0.14.
19. D. Menaga (2018), “Least Lion Optimization algorithm (LLOA) Based Secret key Generation for Privacy Preserving Association Rule Hiding”, In: IET Information Security, Vol.No.12, Issue.4, Pg.No.332- 340, IF: 0.890, SNIP: 1.421, SJR: 0.381, doi number: 10.1049/iet-ifs.2017.0634.
20. P. SelviRajendran (2017), “Employability Enhancement Methods for Engineering Graduates”, In: International Journal of Advanced Scientific Research and Management International, Vol.No.2 ,Issue.9, ISSN 2455-6378.
21. R. Dhanalakshmi (2017), “Soft Biometrics Traits for Continuous Authentication in Online Exam Using ICA Based Facial Recognition” In: International Journal of Network Security, Vol.No. 20(3), Pg.No.423-432, SJR:0.37, doi number: 0.6633/IJNS.201805.20(3).03.
22. S. Sankar (2017), “Non-Linear Chaotic Map for Secure Data Transmission”, In: International Journal on Recent and Innovation Trends in Computing and Communication, Vol.No.5 Issue.5, Pg.No. 380-384, IF: 5.837, ISSN: 2321-8169.
23. S. Sankar (2017), “A Method to Compression then encryption for Images”, In: International Journal Of Engineering Sciences & Research Technology, ISSN: 2277-9655, doi number: 10.5281/zenodo.809006.
24. M. Krishnamurthy (2017), “Extracting the User’s Interests from Web Log Data using A Time Based Algorithm”, In: International Journal of Trend in Scientific Research and Development, ISSN: 2456-6470, Vol.No.1, Issue.6, IF: 4.101.
25. V. Vasanthakumar (2017), “A Power-graph based approach to Detection of Research Communities from Co-Authorship Networks”, In: Journal of Computational and Theoretical Nanoscience, Vol.No.14, Pg.No.5686-5695, SJR: 0.22.
26. C. Emilinshyni (2017), “Design of enhanced combined regression ranking algorithm for Resource Sharing in yarn”, In: Journal of Advanced research in dynamical and control systems, Issue.15, Pg.No.268-276, SJR: 0.11.
27. C. Emilinshyni (2018), “Survey Paper on PhidFive-Phishing detection Model using five Level approaches”, In: International Journal of current engineering and Scientific research, Vol.No.5, Issue.1, SJR:2.82, ISSN (PRINT): 2393-8374, (ONLINE): 2394-0697.
28. A. Balaji S. Sendhilkumar, G. S. Mahalakshmi (2017), “Finding related research papers using semantic and co-citation proximity analysis”, In: Journal of Computational and Theoretical Nanoscience, Vol.No.14, Issue.6, Pg.No.2905-2909, SJR: 0.22.
29. M. Krishnamurthy (2016),”Survey of various approaches of types of intrusion detection techniques based on data mining”, In: International Journal of Advanced Technology in Engineering and Science, Vol.No.8, Issue.8, ISSN 2348- 7550, SJR:0.22.
30. R. Dhanalakshmi (2016),”Stride towards Proposing Multi-Modal Biometric Authentication for Online Exam”, In: International Journal of Network Security, Vol.No.18, Issue.4, Pg.No.678-687, SJR: 0.37.
31. R. Dhanalakshmi (2016),”Privacy Protection for Transmission of Medical Data through Wireless Network”, In: IJCTA, Vol.No.9 (3), Pg.No.1633-1640, IF: 4.08, SJR: 0.1.
32. C. EmilinShyni (2016), “A Multiclassified based prediction model for phishing email’s detection using topic modeling, named entity recognition and image processing”, In: Circuits and system journal , Vol.No.7 Pg.No.2507- 2250, IF:0.59, SJR:0.53.
33. C. EmilinShyni (2016),”Consistency testing of phishing websites based on random model approach using classification algorithms”, In: Asian journal of research in social science and humanities, Vol.No. 6(11), Pg.No.350-366, SJR:0.15, doi number: 10.5958/2249-7315.2016.01197.7
34. C. EmilinShyni (2016), “Spam profile detection in online social network using statistical approach”, In: Asian journal of Information technology, Vol.No.25 (7), Pg.No.1253-1262, SJR: 0.11.
35. Poonkavithai Kalamegam (2016), “Requirements Driven Test Prioritization Approach for Web Service Composition”, In: International Journal of Computer Applications and Technology, Vol.No.54, SJR: 0.11, doi number: 10.1504/IJCAT.2016.080491.
1. Sivaraju, S.S. Chitra, J.Anuradha, T.Pandian, A.(2023) “An Intelligent Load Balancing Strategy for Energy Cost Minimization in EV Applications” Electric Power Components and Systems, Vol-51, 1 5325016,IF:1.5
2. Bindu Vadlamudi & Anuradha T(2023) “Optimized Hybrid CNN-LSTM Based Islanding Detection of Solar-Wind Power System” Electric Power Components and Systems,Vol-51, 0142-0615 ,IF:1.5
3. T. Vinothkumara, S.S. Sivarajua, Anuradha Thangaveluband S. Srithars(2023) “An energy-efficient and reliable data gathering infrastructure using the internet of things and smart grids” Journal for Control, Measurement, Electronics, Computing and Communications, 1848-3380,IF:1.79.
4. Dr. T . Anuradha,(2023) “Voltage Fed Single Stage Inverter for Generating Systems With Multiple Inputs Inverter Using Pulse Width Modulation” Sustainable Energy Technologies and Assessments, Elsevier, 2213-1388,IF:8.84
5. Balasubramaniam Brindha Sakthi, Parvathysankar Deiva Sundari(2022)”Design of coil parameters for inductive type wireless power transfer system in electric vehicles”International Journal of Energy Research, Wiley,Vol-46, Issue-10,Pages 13316-13335,1099-114X,IF:5.164
6. Deiva Sundari Parvathysankar, (2022)”A hybrid Grasshopper Optimization Algorithm and Harris Hawks Optimizer for Combined Heat and Power Economic Dispatch problem”,Engineering Applications of ArtificialIntelligence,Vol-111,2022,104753,0952-1976.IF:6.212
7. Murugan Ramachandran, Seyedali Mirjalili, Mohan Malli Ramalingam, Christober Asir Rajan Charles Gnanakkan, Deiva Sundari Parvathysankar, Arunachalam Sundaram (2022)A ranking-based fuzzy adaptive hybrid crow search algorithm for combined heat and power economic dispatch,Journal of Expert Systems with Applications, Elsevier,Vol-197,0957-4174,IF:6.954
8. Priya J.S., Femina M.A., Samuel R.A., (2020), “APSO-MVS: an adaptive particle swarm optimization incorporating multiple velocity strategies for optimal leader selection in hybrid MANETs”, Soft Computing, IF:3.050 and 10.1007/s00500-020-05034-z.
9. Gayathri R., Deiva Sundari P., Thakur S., Sarathi R.(2019),” Investigation on the dielectric performance of titania nanoparticles and surfactant added mixture of mineral and natural ester oil”, Materials Research Express, Vol.6, Issue.12, IF:1.929, 10.1088/2053-1591/ab54fd..
10. Selvam R., Velavan R., Soundarrajan A. (2019), “A sustainable energy management soft computing system for photovoltaic/wind hybrid power generation system”, International Journal of Environment and Sustainable Development, Vol.18, Issue.3,SJR: 0.19, 10.1504/IJESD.2019.100997.
11. Prasanth J.S., Ramachandraiah U., Prabhuraj S., Muthukumaran G., (2020), “Internet of things based hybrid cryptography for process data security”, Journal of Mathematical and Computational Science, Vol.10,Issue.6, SJR:0.0 , 10.28919/jmcs/4825. .
12. S. Gowtham, M.AmmalDhanalakshmi, P.DeivaSundari, “Modelling and Experimentation of Modified Cascaded Multilevel Inverter with Optimized Output”, Journal of Electrical Engineering, Vol.19, Issue.4, SJR: 0.2.
13. R. Murugan, P. Deiva Sundari (2018), “Hybridizing bat algorithm with artificial bee colony for combined heat and power economic dispatch”, In: Applied Soft Computing (Elsevier), Vol. No.72, Pg. No.189-217, IF: 3.907, SNIP: 2.006, SJR: 1.199, doi number: 10.1016/j.asoc.2018.06.034.
14. Shanmuga Priya (2018), ”Comparative study of firefly Algorithm with PI, PID, and Fuzzy controller for Diode Bridge Power factor Correction”, In: International Journal of Pure and Applied Mathematics (Academic Publications), Vol.No.120, Issue.6, Pg.No. 1129-1140.
15. S. Gowtham, M. Ammal Dhanalakshmi, P. Deiva Sundari (2018),”Modernized PWM Technique for Modified Cascade Multilevel Inverter to Minimize THD”, In: International Journal of Pure and Applied Mathematics (Academic Publications), Vol. No: 120, Issue: 6, Pg.No. 1537-1549.
16. A. Arvin Tony (2018), “A Review of Meta-Heuristic techniques for Distributed Generation”, In: International Journal of Pure and Applied Mathematics (Academic Publications), Vol: No: 120, Issue: 6, Pg.No. 997-1007, SJR: 0.14.
17. S. Gowtham, K. Karthikeyan (2018), ” Performance analysis of Modified Variable Frequency Drive (VFD) With Improved Efficiency”, In: International Journal of Pure and Applied Mathematics (Academic Publications), Vol.No: 120, Issue.6, Pg.No.1593-1605, SJR: 0.14.
18. S. Balaji (2018),”Bi-Directional Dc-Dc Converter For Energy Storage In Solar PV System”, In: International Journal of Pure and Applied Mathematics (Academic Publications), Vol.No: 120, Issue: 6, Pg.No. 1101-1111, SJR: 0.14.
19. V. Subramaniyan (2018), “Congestion management in restructured power system using photovoltaics”, In: International Journal of Engineering and Technology, Vol.No:7(4.10), Pg.No.144-147, SJR: 0.17, doi number: 10.14419/ijet.v7i4.10.20825.
20. T. Anuradha (2018), “A multi objective control strategy based power flow control of PV system for remote Power Solutions”, In: IEEE-International conference on Power Electronics drives and Engineering System at IITM (IEEE), Accepted for Publication.
21. R. Selvam (2018), “A sustainable Energy management soft computing system for Photovoltaic/wind Hybrid Power Generation System”, In: International journal of Environment and sustainable Development (Inderscience), Vol.N: 18(3), doi number: 10.1504/IJESD.2019.10018356.
22. P. Deiva Sundari, T. Anuradha (2017), “LOCV-VSS-INC Strategy based Hybrid MPPT Controller for Remote Power Applications”, In: IET Power Electronics, Vol.No. 10, Issue: 11, Pg No: 1363-1376, IF: 2.267, SNIP: 1.196, SJR: 0.803.
23. S. Solai Manohar (2017), “Nominal features-based class specific learning model for fault diagnosis in industrial applications”, In: Computers and Industrial Engineering,Vol.No. 116, Pg No: 163-177, IF:3.195, SNIP: 1.781, SJR: 1.463,
24. S. Solai Manohar (2016), “Pre- channel scheduling and priority based reservation in medium access control for industrial wireless sensor network applications”,
In: Computers and Electrical Engineering (Pergamon-Elsevier Science Ltd), IF: 1.747, SNIP: 1.142, SJR: 0.401, doi number:10.1016/j.comeleceng.
25. P. Deiva Sundari (2016), “Analysis and Implementation of MPPT Algorithm for a PV System with High Efficiency Interleaved Isolated Converter”, In: Advances in Intelligent Systems and Computing, (Springer) Vol.No.467, Pg.No. 551-560.
26. P. S. Mayurappriyan (2016), “Distinct Exploration on Two-Level and Hybrid Multilevel Converter for Stand-alone Solar PV Systems”, In: Advances in Intelligent Systems and Computing, (Springer), Vol. No. Vol.No.467, Pg. No.301-316.
27. P. S. Mayurappriyan (2016), “Dynamic Scheduling of Machines Towards the Vision of Industry 4.0 Studio – A Case Study”, In: Advances in Intelligent Systems and Computing, (Springer), Vol. 467, Pg.No. 103-112.
28. P. S. Mayurappriyan (2016), “Distributed Generator Placement and Sizing Based on Genetic Algorithm”, In: Advances in Intelligent Systems and Computing, (Springer), Vol. 467, Pg.No. 377-386.
29. K. Vinoth (2016),”A Novel Single phase asymmetrical multilevel inverter with reduced number of switches “, In: International Journal of Control Theory and Applications, Vol. 9, Issue 14, Pg.No. 6623-6630, SJR: 0.1.
30. S. Pradeep, M. PreshNave (2016), ”Adaptive Control Technique for Generator Side Power System Voltage Stability at Wind Power Station”, In: Advances in Intelligent Systems and Computing, Vol.No. 467, Pg.No.541-550, doi No: https://doi.org/10.1007/978-981-10-1645-5_45.
31. J. Arun Venkatesh (2015), ”Implementation of multi level inverter for PV application with Novel PWM technique”, In: International Journal of Applied Engineering Research,(RI publication), Vol.No.10,Issue 44, 2015, Pg.No. 31336-31344, SJR: 0.2.
32. J. Arun Venkatesh (2015), “Voltage Sag compensation in Stand Alone Power System using SRF theory”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 66, Pg.No. 203-205, SJR: 0.2.
33. P. Deiva Sundari, J. Agnus Jenith (2015), ”Integration of DC-DC CUK Converter for Efficient Regenerative Braking in Hybrid Electric Vehicles”, In: International Journal of Applied Engineering Research (RI publication) Vol.10, Issue 66,Pg.No. 27764-27769, SJR: 0.2.
34. P. Deiva Sundari, S. Balaji (2015),”High boost ratio hybrid DC-DC converter for batter charging applications”, In: International Journal of Applied Engineering Research (RI publication) Vol.10, Issue 9, Pg.No. 7333-7337, SJR: 0.2.
35. Subash Chandra Bharathi. S (2015), “Implementation of NOR Flash Memory Using JFFS2”, In International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 23, Pg.No. 20835-20839, SJR: 0.2.
36. Subash Chandra Bharathi. S (2015), “Implementation of NOR Flash Memory Using JFFS2”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 23, Pg.No. 20835-20839, SJR: 0.2.
37. L. N. Ramya (2015), “Energy Conservation -A Case Study”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 9, SJR: 0.2.
38. J. Arun Venkatesh (2015),”Unified Power Quality Conditioner Supported by Wind Energy Conversion System For Mitigating Voltage Sag and Harmonics”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 6, Pg.No 6265-6269, SJR: 0.2.
39. J. ArunVenkatesh (2015), “Unified Power Quality Conditioner Supported by Wind Energy Conversion System for Mitigating Voltage Sag and Harmonics”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 6, Pg.No 6265-6269, SJR: 0.2.
40. P. Deiva Sundari (2014), “Instantaneous Power based Current Control Scheme for VAR Compensation in Hybrid AC/DC Networks for Smart Grid Applications”, In: IET Power Electronics (IEEE) Vol. No. 7, Issue: 5, IF: 2.267, SNIP: 1.196, SJR: 0.803, doi number: 10.1049/iet-pel.2013.0253.
41. P. Deiva Sundari (2014), “Nonlinear Intermittent Instabilities and their Control in an Interleaved DC/DC Converter “, In: IET Power Electronics (IEEE) Vol. No. 7, Issue: 5, IF: 2.267, SNIP: 1.196, SJR: 0.803,
42. P. Deiva Sundari (2015), “Power Quality Improvement in a Low-Voltage DC Ceiling Grid Powered System”, In: IET Power Electronics (IEEE), Vol. No. 8, Issue: 10, IF: 2.267, SNIP: 1.196, SJR: 0.803, doi number: 10.1049/iet-pel.2014.0715.
43. K. Karthikeyan (2015), ”Augmenting Solar Power with Ultra Capacitor”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 10, SJR: 0.15.
44. P. Deiva Sundari (2015), “Five level diode clamped inverter with three level boost converters”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 9, SJR: 0.15.
45. S. Rajesh, P.Deiva Sundari (2014), ”Two stage HP LED Driver for Street Lighting Applications”, In: International Journal of Applied Engineering Research, (RI publication) Vol.9, Issue 25, Pg. No.8650-8654, SJR: 0.15.
46. S. Balaji, P.Deiva Sundari (2014), “Magnetic less DC-DC Converter for Solar System”, In: International Journal of Applied Engineering Research, (RI publication) Vol.9, Issue 25, Pg.No.26431-26445, SJR: 0.15.
47. V. Ramya (2014), “Flywheel Energy Storage System, technology by using partial magnetic levitation”, In: Journal of Chemical and Pharmaceutical Science, Issue 4, Pg.No.257-259, SJR: 0.15. doi number: 10.23956/ijarcsse.v7i8.30.
48. J. ArunVenkatesh (2014), “Mitigating Power Quality Problems and Comparison of PV supported Dynamic Restorer and Distribution STATCOM in Stand Alone Wind Energy Conversion System”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 24, Pg.No 26431-26445, SJR: 0.2.
49. M. A. Femina (2014), “Automatic Segmentation of Foetal Heart Chamber from Ultra Sound Images”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 24, Pg.No. 8633-8635, SJR: 0.2.
50. Ramesh Prabhu, P. Deiva Sundari (2014), “Permanent Magnet Synchronous Wind Generator With Matrix Converter Using Venturini Algorithm”, In: International Journal of Applied Engineering Research, (RI publication) Vol.10, Issue 9, SJR: 0.2.
51. P. Deiva Sundari (2014), “Swing Generator Using Power Electronics”, In: International Journal of Applied Engineering Research, (RI publication) Vol.9, Issue 24, SJR:0.2
52. Dr. T. Anuradha (2019), “A multi objective control strategy based power flow control of PV system for remote Power Solutions”, In: IEEE-International conference on Power Electronics drives and Engineering System –IIT-Madras, Chennai, India.
53. Mr. R. Selvam (2019), “Design and Implementation of Hybrid FIR filters using Vedic Multiplayer and Fast Adders”, In: Emerging Trends in Engineering Technology Management and Sciences, ISBN No: 978-81-930222-6-9, Hyderabad, India.
54. Mr. R. Selvam, Dr. T. Anuradha, Mr. A. Arivanandan (2019), “IOT based Energy Management System for Hybrid Solar and Wind Energy”, In: Latest Trends in Engineering and Management- International Conference on Latest Trends in Engineering and Management, Pondicherry , India.
55. Dr. T. Thruppathi, Dr. T. Anuradha, (2019) “Marine Biofouling Control Process using Novel High Voltage Pulse System for Marine Environment Protection”, In: Biological Engineering Society- International Conference on Biological Engineering Society-IIT-Madras, Chennai, India.
1. Karthick J., Samuel Devadoss R., Sharmila S., Natesan R., (2020), “Investigational assessment on gaseous stack emissions from liquid form of fuels under various loading conditions”, Pollution Research, Vol.39, SJR:0.13.
2. Prasanth J.S., Ramachandraiah U., Muthukumaran G., (2020), “Modified Hardware Security Algorithms for Process Industries Using Internet of Things”, Journal of Applied Security Research, SJR.0.1, 10.1080/19361610.2020.1736458.
3. Prasanth J.S., Ramachandraiah U., (2020), “Embedded system with internet of things for secure monitoring of vehicle accidents”, Journal of Green Engineering, Vol.10, Issue.7. SJR: 0.19.
4. N. Bharathi, N. Sivakamasundari (2018), “Understanding the characteristics of nano mineral oil under Lightning Impulse Voltage”, In: International Journal Pure & Applied Mathematics, Vol: No: 118, Issue:-22, Pg.No: 839-1844, SJR: 0.14.
5. B. Rammyaa (2018), “Coded downlink MIMO MC-CDMA System for Cognitive Radio Network Performance results”, In: CLUSTER COMPUTING, Vol. No:1386-7857, pp 1-8, Online 1573-7543, IF: 1.601, SNIP: 1.115, SJR:0.374, doi number: 10.1007/s10586-018-1815-x.
6. B. Rammyaa (2017), “Performance of Spectrum Sharing cognitive radio network based on MIMO MC-CDMA System for Medical image transmission”, In: CLUSTER COMPUTING, Pg.No:1-8, IF:1.601, SNIP:1.115, SJR:0.374, doi number: doi.org/10.1007/s10586-017-1290-9.
7. N. Bharathi (2017),” Real coded GA tuned decentralized decoupled PID for fluid catalytic cracking”, In: Austrian Journal of basic and applied sciences, ISSN: 1991-8178.
8. N. Bharathi (2017), ”A GA approach for optimum Design of Control theory and applications”, In: International Journal of control theory and application, ISSN:0974-5572,Vol.No.16, Pg.No:333-342, SJR: 0.1.
9. R. Senthil (2015), “Simulation of three tank System using Hybrid Perti Net for Batch process”, In: International Journal of Applied Engineering Research, Vol No.10, Issue 2, Pg.No:4789-4798.
10. R. Senthil (2014), “Modeling and analysis of PET bottle manufacturing system using hybrid petri net”, In: International Journal of Applied Engineering Research, Vol.No.9, Issue: 26, Pg.No: 9201-9204, SJR: 0.2.
11. B. Rammyaa (2014), “Automated Identification of Diabetic retinopathy in early detection using fundus Images”, In: International Journal of Applied Engineering Research, ISSN 0973-4562, Vol.No.9, Issue.25, Pg. No: 8507-8513, SJR: 0.2.
12. Dr. K. Karthikeyan, Dr. S. Jayakumar, Mr. R. Natesan(2019), “Design and Implementation of Hybrid FIR filters using Vedic Multiplier and fast adder”, In: International Conference on Emerging Trends in Engineering technology management and technology Management & Technology, ISSN NO: 978–81–930222–6–9, Hyderabad, India.
13. Dr. S. Jayakumar (2019), “IoT Based energy management system for Hybird solar and wind energy”, In: International conference on Latest trends in Engineering and Management, Pondicherry , India.
